Miles Blanchet Wins Alabama EPSCOR Graduate Reseach Fellowship

Congratulations go out to FINO Lab Ph.D. student Miles Blanchet, who won a fellowship through the Alabama EPSCOR Graduate Research Scholars Program! The fellowship will support his research on the synthesis and catalytic properties of oxide thin films and nanocomposites. We’re also happy to congratulate our collaborators on our NSF funded project, Alex Bredar and Prof. Byron Farnum. Alex also won the fellowship, meaning that we’ll be doubling the size of our team with additional grad students in the coming months. Watch out for more interdisciplinary science soon!

FINO Lab Heads to ACERS Electronic Materials and Applications 2019

The FINO Lab will be hitting the road for a trip to Orlando to present our ongoing work at the American Ceramics Society Electronic Materials and Applications conference! Look for Miles Blanchet’s talk on Mn-based spinels from our ongoing NSF project on oxide films for hybrid catalysts and Suresh Thapa’s presentation on surface studies of SrTiO3 grown by hybrid molecular beam epitaxy. Both students will be presenting Thursday morning in the Complex Oxide and Chalcogenide Semiconductors symposium that Dr. Comes has organized. Alex Bredar from our collaborator Prof. Byron Farnum’s group will also be presenting on our collaborative work on CuGaO2 mesoporous films that is in press with ACS Applied Energy Materials. Looking forward to a great week!

Collaborative Paper on LaMnO3-SrTiO3 Interfaces Published in Advanced Materials Interfaces

Our collaborative paper on LaMnO3 (LMO)/SrTiO3 (STO) interfaces has been published in Advanced Materials Interfaces. This work, led by Dr. Tiffany Kaspar at Pacific Northwest National Lab, explores changes to Mn valence in LMO at the interface with STO, showing that Mn is partially reduced to a 2+ valence at the interface due to the polar discontinuity between STO and LMO. This has important implications for understanding the behavior of oxide spintronic materials, where manganese-based oxides are of considerable interest.

Paper on SrTiO3-LaCrO3 Superlattices Published in PRB

Our newest paper is out in Physical Review B, focusing on interfacial electronic behavior in SrTiO3-LaCrO3 superlattices. Dr. Comes synthesized these samples at PNNL and Prof. Chuck Fadley’s group at UC Davis performed synchrotron standing-wave x-ray photoelectron spectroscopy measurements to probe how the interfaces led to a built-in electric potential gradient across the layers of the sample. Prof. Fadley’s group pioneered the use of these measurements, which allowed us to vary our sensitivity to different interfaces within the superlattice. We produced record-breaking standing-wave effects, which is indicative of excellent sample quality and material design, and allowed us to very carefully measure the electronic band alignment in each layer of the material. Our results support our previous interpretation from a paper published in Advanced Materials Interfaces in 2016. We also showed unprecedented interfacial sensitivity using the technique by identifying the individual SrO-CrO2 and LaO-TiO2 interfaces within the superlattice. This emerging technique for superlattice characterization is opening new doors for how to study complex materials and we hope that this paper is an important new step in that direction!

FINO Lab Gets NSF Grant for Studies of Oxide Nanocomposites for Catalysis

Our collaborative project with Prof. Byron Farnum in the Auburn Chemistry department was awarded from the Solid State and Materials Chemistry program at NSF! Over this three year project, we’ll be looking at epitaxial spinel and perovskite thin films to understand their physical and chemical behaviors as catalysts and then integrating them into nanocomposites to serve as bifunctional catalysts for the oxygen evolution and oxygen reduction reactions for hydrogen fuel cells. Check out more here and watch for presentations at conferences soon!

XPS Delivered!


Our new (refurbished) PHI 5400 XPS has arrived from RBD Instruments! The monochromatic XPS will be attached to our MBE in May during installation and complete our laboratory construction. We will be the only university in the United States with a combination of hybrid oxide molecular beam epitaxy and in situ x-ray photoelectron spectroscopy. The system is also capable of ion scattering spectroscopy for surface termination measurements using He+ ions. Look for exciting new results from our system soon!

Big Month of March for Will Bowers

Will Bowers This is Research

FINO Lab undergraduate student Will Bowers had a great month of March with three big events coming back-to-back-to-back. First, Will was accepted into the Penn State Materials Physics REU program, where he will be working with Prof. Long-Qing Chen over the summer. He also presented a poster on his work for the past year in the group at the Auburn This Is Research Symposium. To top it all off, he was then chosen as one of the winners of the Auburn Undergraduate Research Fellowship. This award will support his work on an independent project in the lab for the next academic year. Congrats Will on some great achievements!

Paper on La2Ti2O7 Thin Films Published in Scientific Reports

La2Ti2O7 STEM Image

Our collaborative paper on La2Ti2O7 thin films led by Dr. Tiffany Kaspar at Pacific Northwest National Lab has been published in Scientific Reports. In this work, we explore the ordering of oxygen interstitial ions to form the layered perovskite-related structure and study its ferroelectric and piezoelectric properties. These materials are exceptionally challenging to synthesize but have exciting properties due to the high ferroelectric Curie temperature that they possess. Nice work Tiffany!